Skip to main content

Using SSH tunnels

In some cases you may need to access remote hosts that have private IP addresses or are protected behind a firewall. These hosts might be accessible through an intermediate login host. The SSH tunnels (SSH port forwarding) facilitate access to multiple hosts protected behind a single host exposed to the Internet. Once the tunnels are established the hosts behind the firewall can be accessed directly. Examples were tunnels can be beneficial:

  • When using the INCD cloud service you may have multiple VMs with private IP addresses acessible through a single VM with public IP address. This enables you to directly access remote VMs while saving scarse IPv4 address space.
  • Some INCD services are not directly exposed to the Internet and may require passing through an intermediate login host for added security.

In the following examples the hostnames public.ncg.ingrid.pt and internal.ncg.ingrid.pt are placeholders that should be replaced by actual real hostnames according to your scenario.

jump over SSH hosts easily from the command line

  • If you just need to connect via SSH to hosts behind the firewall by jumping over a reachable host you can use the jump host functionality of SSH whose syntax is described below and where:
    • internal-remote-host is the host or IP address behind the firewall that you want to reach via SSH.
    • public-remote-host the remote host or IP address of the intermediate host that is exposed to the Internet through which you will connect to the internal-remote-host.

Basic jump host syntax:

ssh -J public-remote-host   username@internal-remote-host

Example of using the SSH jump host to access the SSH port (port number 22) of the remote host internal.ncg.ingrid.pt through a publicly reachable host public.ncg.ingrid.pt.

ssh -J public.ncg.ingrid.pt  username@internal.ncg.ingrid.pt
scp -J public.ncg.ingrid.pt  mylocalfile  username@internal.ncg.ingrid.pt:
sftp -J public.ncg.ingrid.pt username@internal.ncg.ingrid.pt

ssh -J username@public.ncg.ingrid.pt  username@internal.ncg.ingrid.pt

forwarding of X11 windows

  • SSH enables the forwarding of X11 windows
  • This requires that your local machine has an X11 display server. If you are on Windows you can use MobaXterm that works both as ssh client and X server.
  • For more information see https://wiki.incd.pt/books/how-to-access/page/configuring-ssh

port forwarding from local to remote in detail

  • The tunnels (port forwarding) are defined upon the connection to the intermediate host that is directly acessible over the Internet.
  • Therefore we first need to start an SSH session to the intermediate host, simultaneously we define one or more port forwardings using the -L option. The basic syntax for SSH port forwarding is described below where:
    • local-port is a TCP port of your local machine (your desktop, laptop, etc). Just pick one port that is not being used above the privileged port range (above 1024) and preferrably outside of the IP ephemeral port range to avoid collisions with dynamically allocated ports (for many Linux systems outside the range of 32768-60999).
    • internal-remote-host is an IP address or hostname of a remote host behind the firewall.
    • internal-remote-port is the TCP port of the internal-remote-host that you want to access.
    • public-remote-host the remote host or IP address of the intermediate host that is exposed to the Internet.

Basic port forwarding syntax:

ssh -L local-port:internal-remote-host:internal-remote-port   public-remote-host

Example of establishing a tunnel to access the SSH port (port number 22) of the remote host internal.ncg.ingrid.pt through a publicly reachable host public.ncg.ingrid.pt. We pick a random local-port of 31732 that is then mapped to the port 22 of internal.ncg.ingrid.pt.

ssh -L 31732:internal.ncg.ingrid.pt:22   public.ncg.ingrid.pt

Once the SSH connection to public.ncg.ingrid.pt is established the host internal.ncg.ingrid.pt can be directly accessed from your local host by connecting to the local-port:

ssh -p 31732 username@127.0.0.1
scp -P 31732 mylocalfile  username@127.0.0.1:
sftp -P 31732 127.0.0.1

Another example where both port 22 (SSH) and port 80 (HTTP) are mapped to local ports. Then we can test the access to the web server on the remote port 80 using curl.

ssh -L 31732:internal.ncg.ingrid.pt:22 -L 8080:internal.ncg.ingrid.pt:80  public.ncg.ingrid.pt

curl http://127.0.0.1:8080

port forwarding from remote to local in detail

  • This enables a remote host behind the firewall to access services in your local network.
  • This can be potentially dangerous for you as it enables users in the remote machine or remote network to access your local machines.
  • The basic syntax for port forwarding from the remote side to the local side is described below where:
    • remote-port-on-public-host is a port number from the public-remote-host Just pick one port that is not being used above the privileged port range (above 1024) and preferrably outside of the IP ephemeral port range to avoid collisions with dynamically allocated ports (for many Linux systems outside the range of 32768-60999).
    • local-host a host in the local network of the user to be accessed from the public-remote-host.
    • local-port the port number of the localhost to be accessed from the public-remote-host.
    • public-remote-host the remote host or IP address of the intermediate host that is exposed to the Internet.

Basic remote port forwarding syntax:

ssh -R remote-port-on-public-host:local-host:local-port   public-remote-host

Example of forwarding the remote-port number 65532 on public.ncg.ingrid.pt to the port 22 of the local host named myotherlocalhost.

ssh -R 65532:myotherlocalhost:22   public.ncg.ingrid.pt

Then from public.ncg.ingrid.pt you can access the host in the local network with:

ssh -p 65532 127.0.0.1

jump host via config file

  • Configuring jump host in your $HOME/.ssh/config where:
    • Host is a name choosen by you to identify this mapping, this name may be different from the hostname and will be recognized as a hostname only by SSH.
    • Hostname the real hostname of the internal host that you want to access and is behind the firewall.
    • User the username for the internal host identified by Hostname.
    • ProxyJump the remote host or IP address of the intermediate host that is exposed to the Internet.

The basic configuration for remote access via a jump host

Host name-for-the-internal-remote-host
Hostname actual-internal-remote-host
User username-in-actual-internal-remote-host
ProxyJump username@public-remote-host

Example of configuration:

Host ncg-internal
Hostname internal.ncg.ingrid.pt
User username-for-internal
ProxyJump username@public.ncg.ingrid.pt

Accessing the configured host:

ssh ncg-internal

port forwarding via config file

  • Configuring port forwarding in your $HOME/.ssh/config requires configuring two hosts. The first will be the intermediate host accessible through the Internet and the second the internal host. The fields are as follows:
    • public-remote-host the remote host or IP address of the intermediate host that is exposed to the Internet.
    • LocalForward the mapping of a local-port to a remote internal hostname or IP address and port number that are behind the firewall.
    • name-for-the-internal-remote-host is a name choosen by you to identify this mapping, this name may be different from the actual hostname and will be recognized as a hostname only by SSH.
    • local-port must be the same across the two host definitions and is a local TCP port number that will be mapped to the internal-remote-host and internal-remote-port.

The basic configuration for port forwarding

Host public-remote-host
LogLevel FATAL
LocalForward local-port internal-remote-host:internal-remote-port

Host name-for-the-internal-remote-host
Hostname 127.0.0.1
User username
Port local-port
HostKeyAlias name-for-the-internal-remote-host

Example of port forwarding for both SSH (port 22) and HTTP (port 80):

Host public.ncg.ingrid.pt
LogLevel FATAL
LocalForward 31732 internal.ncg.ingrid.pt:22
LocalForward 8080  internal.ncg.ingrid.pt:80

Host ncg-internal
Hostname 127.0.0.1
User username
Port 31732
HostKeyAlias ncg-internal

Accessing the configured host

ssh ncg-internal
curl http://127.0.0.1:8080

(*) notice that you cannot use the hostname ncg-internal with curl as this is a hostname that is only defined and recognized by SSH.

using socks proxies

  • SSH supports socks4 and socks5 proxying. This allows socks enabled applications to access hosts behind the firewall. This is only valid for socks enabled applications e.g. firefox.

The basic command line usage to establish a socks server:

ssh -D local-port  public-remote-host

The basic $HOME/.ssh/config setup to establish a socks server:

Host public-remote-host
DynamicForward local-port

Example for use with Firefox:

Host public.ncg.ingrid.pt
DynamicForward 31733

Then in firefox:

  1. Goto Preferences->Network Settings:
  2. Select Manual proxy configuration
  3. Enter in SOCKS Host: 127.0.0.1
  4. Enter in Port: 31733
  5. If needed add local networks to be excluded from the proxy using No proxy for
  6. If needed add the options related to DNS proxying

(*) notice that all your http request will now be forwarded through the socks proxy, to restore the previous settings choose No proxy in the Preferences->Network Settings.

(*) as in the other examples the port number to be allocated might need to be adjusted to match a free port number in your local machine (desktop, laptop, etc).

using sshuttle

The tool sshuttle is available in many Linux distributions. It uses SSH in combination with iptables and other functionalities to easily establish tunnels with better performance and a behavior more similar to a VPN. Instead of establishing a direct end-to-end TCP connection to the remote internal hosts, sshutle intercepts local packets, sends their payload over SSH and establishes connections from the remote public host to the internal hosts. This prevents some of the issues associated with TCP end-to-end connections as SSH inner tunnels and also enables other capabilities such as accessing more transparently hosts and services behind the firewall.

Requirements:

  • Python 2.3 or higher on the remote server side.
  • sshuttle requires root privileges in your local machine (desktop, laptop, etc), root privileges in the remote machine are not required.
  • sshuttle must be installed in the local client side, sshuttle is not required on the remote host.
  • Create an sshutle configuration file for instance in $HOME/.ssh/sshutle-ncg.conf with the following content:
    • remote networks plus prefixes one per line (e.g. 192.168.1.0/24)
    • --auto-nets optional to add networks know by the remote host side.
    • --dns optionally enables the capture of dns requests and forwards them to the remote side, use carefully as it may disrupt your local DNS queries. Also if you have multiple sshuttle instances you can only have one of them capturing and forwarding the DNS queries.
    • --auto-hosts to enable discovery of hosts in the remote side
    • --seed-hosts followed by a line containing remote hostnames separated by commas
    • --remote followed by a line with the hostname of the public remote host to act as intermediate host

Template for the sshutle configuration file:

ip-network-A/ip-prefix-A
ip-network-B/ip-prefix-B
ip-network-X/ip-prefix-X
--auto-nets
--auto-hosts
--seed-hosts
internal-remote-host-01,internal-remote-host-02, ...
--remote
username@public-remote-host

Example that needs to be adjusted to your actual needs:

192.168.1.0/24
192.168.2.0/24
--auto-hosts
--seed-hosts
internal.ncg.ingrid.pt, otherinternal.ncg.ingrid.pt
--remote 
username@public.ncg.ingrid.pt

Invoking sshutle from the command line:

sshuttle @$HOME/.ssh/sshutle-ncg.conf

Then you can ssh into the hosts directly:

ssh internal.ncg.ingrid.pt

If the remote internal host has other services running such as a web server they will be also accessible:

curl http://internal.ncg.ingrid.pt
Back to top